Premium Car Essential Oil Diffuser — Direct from MistAirHome Factory. OEM/ODM Available. Free Samples.
Customer Service Hotline:
+8613261677119
Premium Car Essential Oil Diffuser — Direct from MistAirHome Factory. OEM/ODM Available. Free Samples.+8613261677119
TL;DR - The Mistairhome WL-QH01S (PLUS) holds 400 mL and mists 44 mL per hour or 21.8 mL per hour, which is 9.1 hours and 18.3 hours per fill; it covers 12 sq m (125 sq ft) at a 2.6 m ceiling and measures 25.9 dB on the high step and 23.2 dB on the sleep step; it draws 2.6 W and runs from USB-C 5V/1A, runs from a laptop port or a phone charger; no internal cell on this build; it weighs 410 g and measures 10.4 x 10.4 x 18.6 cm, and ships documented to CE / RoHS / FCC standards for import into Hungary. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Quiet Bedside Humidifier with Night Light category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common tank and seal line and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-QH01S-PLUS:
| Misting method | Ultrasonic piezo disc at 1.7 MHz on a floating silicone isolator, cool mist, no heater in the path |
| Tank capacity | 400 mL |
| Mist output on the high step | 44 mL per hour |
| Mist output on the low step | 21.8 mL per hour |
| Run time per fill on the high step | 9.1 hours |
| Run time per fill on the low step | 18.3 hours |
| Coverage area | 12 sq m (125 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 25.9 dB |
| Noise at 1 m on the sleep step | 23.2 dB |
| Water type | Tap water or distilled; a demineralisation cartridge drops into the tank neck |
| Mineral dust handling | Cartridge optional, recommended wherever the supply is hard |
| Fill method | Wide top opening, filled in place from a jug |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/1A, runs from a laptop port or a phone charger |
| Rated power on the high step | 2.6 W |
| Control interface | Touch strip with three mist steps, sleep mode and a two, four or eight hour timer |
| Night light | Amber ring below 4 lux, dimmable to fully dark |
| Protection | Dry-run shut-off by tank float, tilt switch, overcurrent limit on the adapter |
| Dimensions | 10.4 x 10.4 x 18.6 cm |
| Weight | 410 g |
| Warranty | 12 months |
Shipping configuration: Plus build, + hard carry case + wick and cartridge starter set + gift box + funnel. Master carton holds 36 units. Stated lead time is 25-35 days from order confirmation and deposit. Misting discs, wicks and cartridges are repeat line items and are ordered separately from the appliance.
Three things move this category in Hungary: heated or cooled air that dries a room faster than people expect, buildings sealed tightly enough that nothing replaces the moisture, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and facilities supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Quiet Bedside Humidifier with Night Light category cluster around three causes: mineral dust on hard water, units audible at night, and units sized to a floor area in a room with a much higher ceiling. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the water handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Hungary through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-QH01S (PLUS) packs 36 units to a carton, carries a 12 months warranty and a 25-35 days stated lead time, and draws 2.6 W on the high step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or an evaporative wick where the water never becomes airborne at all and the minerals stay behind in the wick.
The second decision is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives. A humidistat with a stated target band, fed by a sensor that is calibrated at the factory and re-checkable by the buyer with a twenty-dollar hygrometer, is the difference between a product that holds a number and one that merely runs.
The third is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, so the honest interval is every five to seven days in continuous use, and a tank a hand cannot reach into is a tank that never gets cleaned properly. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
Three deployment records from the Quiet Bedside Humidifier with Night Light programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A co-living operator with 900 beds across three blocks
Timing: One year from February 2025
Air conditioning runs year round, so this was not a seasonal purchase. The operator bought on a total-cost basis: unit price, spares, and the staff time to clean 900 tanks. The wide-opening tank and the published cleaning interval were what made the cleaning rota feasible, and the operator now budgets the cartridge as a line item rather than an occasional purchase.
Deployment: A rest-home operator with 130 rooms across four facilities
Timing: Two winters from April 2025
Older residents feel dry air more acutely and are more likely to be woken by noise, so the operator set both criteria: a quiet sleep step and a light that can be switched fully off. The four facilities were fitted in sequence over two winters, and the operator now includes both requirements in its standard room specification.
Deployment: A university department running a shared instrumentation room with a humidity-sensitive balance
Timing: Nine months from January 2025
This was a humidity-control purchase rather than a comfort one: the balance drifted below 35 percent RH and the readings stopped being usable. Closed-loop control with a stated target band was the requirement, so the humidistat chassis was the only candidate. The department logs the room RH weekly and the drift stopped, which is a more useful outcome statement than any comfort claim.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the unit could be cleaned inside the time a round allows, and whether anyone complained about the noise or the dust. Those are the questions we ask before quoting. The WL-QH01S (PLUS) packs 36 units to a carton, carries a 12 months warranty and a 25-35 days stated lead time, and draws 2.6 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC02-BEDSIDE | A nightstand beside an adult bed in a heated room | A unit that has to be refilled at two in the morning stops being used inside a week. | A tank sized for a night plus part of the following day on the low step, with a level window that can be read from standing height before the light goes out. |
| SC06-CLEANING | Sites where one person cleans twenty rooms on a timed round | Anything that has to be carried to a sink inverted, or scrubbed through a narrow neck, adds minutes to every room turned that day. | Top fill from a jug and a tank opening a hand can reach into, which is why housekeeping accepts this chassis and rejects narrow-neck designs on sight. |
| SC10-LARGESPACE | Open-plan rooms, studios and lobbies with ceilings well above 2.6 m | A floor-area figure quietly assumes a standard ceiling, and a heritage or lobby space rarely has one. | Sizing against the room volume instead, and where the space opens to the outside, closed-loop control holding a target rather than a fixed mist step. |
| SC04-LIGHTS | Rooms where occupants sleep with the light off and wake if anything glows | A lamp that can only be dimmed and not extinguished is the most common reason a unit gets unplugged. | The night light switches to fully dark, the status indicator sits behind the outlet grille, and the display dims to nothing without changing the mist output. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the cleaning task fits the round. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, wicks and replacement discs - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
Compliance in this category splits into two burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The failure mode is predictable. A buyer orders a cordless build, books the freight, and discovers at booking that the cell documentation has not been raised for that specific model code. The units sit, the season moves, and the cost is not the certificate - it is the delay. We raise the documentation against the model code on the order rather than against a family, which is the only version a customs officer will accept.
RoHS and REACH declarations cover materials, and where a buyer's own regulator asks about the water path, we supply a declaration covering every wetted part. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps and doing them together costs far less than doing them twice. On the WL-QH01S (PLUS) the figures worth carrying into the next order are the 400 mL tank, the 18.3 hours per fill on the low step, and the 23.2 dB reading on the sleep step.
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.092 cubic metres per master carton of 36 units, a 20 ft container takes about 230 cartons, or roughly 8,280 units, and a 40 ft container about 506 cartons, or roughly 18,216 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. We suggest one spare disc per twenty units on a first order and one cartridge per unit where the water is hard, and both ride in the same container as the appliances.
The third is the cost of a return. In this category the majority of returns come from mineral dust, not from malfunction, and the cartridge that prevents them costs a fraction of the return it avoids. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
What order size does Wanlin accept for a first quiet humidifier shipment?
200 units per SKU on standard builds, 300 where a custom colour or private-label packaging is involved, and several models may share one container provided each SKU clears its own minimum. For a buyer testing the category for the first time, a mixed container is the lower-risk route and is the one we recommend over a single-SKU container on an unproven model.
How loud is the unit in practice, and which figure should a buyer compare?
Compare the sleep-step figure, not the headline one. WL-QH01S is rated 23.2 dB on the sleep step and 25.9 dB on the high step, both measured at one metre under stated conditions. In a bedroom the high step is rarely used, so the number that predicts whether the unit stays plugged in is the lower one.
Will an ultrasonic quiet humidifier put mineral dust on dark furniture?
On hard water, yes, unless the build deals with it. The disc atomises the water and everything dissolved in it, and the minerals settle as a white film. For WL-QH01S-PLUS the answer built into the specification is cartridge optional, recommended wherever the supply is hard. Where neither option is acceptable to a buyer, the evaporative chassis removes the question entirely because the water never becomes airborne.
What documentation comes with a quiet humidifier shipment for customs?
CE technical file, RoHS and REACH declarations, an EMC report and the IEC 60335-1 appliance safety report as standard, plus UN38.3, IEC 62133 and MSDS on any build carrying a cell, and FCC for the digitally controlled models going to North America. Every document names WL-QH01S rather than a family, which is what a customs officer checks.
Is private label available across the quiet humidifier range?
Across the whole range, including housing colour, logo, retail artwork, manual language and the accessory kit. Most of it works inside existing tooling, so it does not add engineering time. What it does add is a decision about consumables, and we raise that early because the cartridge choice affects the return rate more than any artwork decision does.
What is the cleaning routine, and how much staff time does it take?
Five to seven days in continuous use, with a dry-out before any period of storage. The routine takes under two minutes on this chassis because the tank opening is wide enough for a hand and a brush, which is deliberate. A narrow-neck tank takes longer, gets cleaned less often, and eventually gets replaced - which is the real cost of a cheap moulding.
What happens if a unit fails inside the warranty period?
12 months on WL-QH01S against manufacturing defect. In practice most failures outside the warranty period are a worn disc or a scaled cartridge rather than a faulty appliance, which is why we stock both as separate lines and ship them with the units. A distributor who can supply the part keeps the customer.
What is the timeline from sample approval to a shipped container?
From approved sample to a shipped container, 25-35 days for first production plus the freight booking step, which is longer on battery builds because of the cell documentation. Sampling itself is 5 to 7 working days on an existing specification. We put the production figure on the proforma invoice so it is a commitment rather than an estimate.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness and by who refills the tank.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration and a light that can be turned fully off. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
First orders go wrong in two predictable places, and both are administrative. The first is documentation raised against the wrong model code, which stops a container at the destination for a reason that has nothing to do with the product. The second is a packing list decided after production begins, which forces either a second shipment or a compromise on the spares.
The sequence that avoids both is short. Agree the specification and the destination list, evaluate a sample on that specification, confirm the packing list including consumables, then release production against a stated lead time written on the proforma invoice.
For a buyer new to the category we also suggest a mixed container across two or three SKUs rather than a single-SKU container, because the sell-through data from one mixed shipment is worth more than any forecast either side can produce in advance. For this configuration that means 21.8 mL per hour at 23.2 dB, holding 18.3 hours per fill across a 12 sq m (125 sq ft) room.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the unit can be cleaned inside the time a round allows. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-QH01S (PLUS) packs 36 units to a carton, carries a 12 months warranty and a 25-35 days stated lead time, and draws 2.6 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 28, 2026
Data sources: in-house factory testing + misting disc and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
